![TILTA FLOAT HANDHELD GIMBAL SUPPORT SYSTEM [GSS-T01-V]](https://store.cameramaker.co.th/wp-content/uploads/2026/01/TILTA-FLOAT-HANDHELD-GIMBAL-SUPPORT-SYSTEM-1.jpg)
![TILTA FLOAT HANDHELD GIMBAL SUPPORT SYSTEM [GSS-T01-V] - Image 2](https://store.cameramaker.co.th/wp-content/uploads/2026/01/TILTA-FLOAT-HANDHELD-GIMBAL-SUPPORT-SYSTEM-2.jpg)
Pre Order
– รหัสสินค้า GSS-T01-V
– Dimensions (Imperial) 35 x 10 x 18″
– Weight (Imperial) 21.77 kg
** ราคายังไม่รวมภาษีมูลค่าเพิ่ม **
The quick release vest has a shock absorbing design. Lightweight and compact. The ergonomical weight distribution design gives the operator steady support. Flexible and easy fitting for all body types.
Durably built with pliable springs provide the forth axis of stabilization. The user has more control while operating.
Easy high and low angle switch. NATO rail connection is built onto both top and bottom ends. Compatible will all gimbals and power supply equipment. Retractable post can function as monopod or extension
Fully authorized DJI internal communication protocol. Precisely control RS2 through the wireless control receiver module.
Power through external V-mount, gold mount, DJI battery grip, and TB50 batteries. Tidy, cordless build. Compact and portable.
Highly portable design for quick assembly and long distance transportation.
The Tilta Float System works in conjunction with the DJI RS 2, RS3 Pro, and RS4 Pro to provide a small, compact camera stabilizer system to allow you to accomplish smooth cinematic camera movements with smaller camera setups.
The counterweight-based post provides further stabilization for your setup beyond what the gimbal is already doing to allow for the smoothest possible free flowing camera movement imaginable.
The spring-loaded arm and support vest design puts the weight of the rig onto your torso, allowing for longer operating times before the user gets fatigued.
The included Wireless Thumb Controller allows you to wirelessly control the Ronin as well as a Nucleus M or Nucleus Nano follow focus motor.
This unit is designed to be mounted to the yoke of your Tilta Float via the system’s Monitor Bracket.
The Controller powers via Go Pro 5-8 Batteries and features a USB-C port that can be used for future firmware updates. Please note we do not recommend powering the unit via this port.
The included Lower Back Support and Single Shoulder Strap provides additional weight distribution ensuring comfortable operation over any duration.
Multiple power options provide more flexibly when powering the Ronin. The system can power the gimbal via Gold Mount, V-Mount, TB50, or the Battery Handle itself via optional accessories.
*The Float is compatible with any gimbal under the weight limit that can mount via 1/4″-20 threads and can power via 2 Pin Lemo or an internal battery, however, it can only wirelessly control the RS2, RS3 Pro, and RS4 Pro*
**The Float does not have power outputs other than the 2 Pin Lemo designed for powering the RS2**
***The Internal Post Cable can handle 14.8V and 3A with maximum ability to handle 6A***
NOTE: The M Key is NOT able to mimic the function of the gimbal. The M Key on this unit can ONLY change the Mode setting.
It is NOT recommended to use gimbals larger than what could be classified as “handheld” such the Movi Pro.
Even if the total weight is under 10kg, the system will have trouble supporting gimbals physically larger than the DJI Ronin RS Series gimbals.
1：Tilta Float System Arm（GSS-T01-ARM）*1
2：Tilta Float System Post（GSS-T01-PST）*1
3：Power Supply Base Plate for RS 2（TGA-PBP）With Cable(TCB-DTP-2LE-40)*1
4：Tilta Float System V Mount Battery Plate（GSS-T01-BPV）*1
5：2-Pin Lemo to 2-Pin Lemo Cable（20 cm)（TCB-2LE-2LE-20）*1
6: Tilta Float System Support Vest（GSS-T01-SV）*1
7：Wireless Thumb Controller for RS 2(GSS-T01-WTC)*1
8：Wireless Control Receiver Module for RS 2(TGA-WCR)*1
9：Tilta Float System Monitor Bracket(GSS-T01-MB)*1
10：Tilta Float System Carrying Case (GSS-T01-CC)
11: Tilta Adjustable Cold Shoe Phone Mounting Bracket – Black（TA-PMB-B）
12：Tool Kit for Tilta Float System（GSS-T01-TK）*1
13：Tilta Float System Cross NATO Rail Post Mount（GSS-T01-CPM）*1
14：Tilta Float System Baby Pin Docking Adapter（GSS-T01-PDA）*1
| TILTA FLOAT SYSTEM SPECS | |
|---|---|
| Product Dimensions | 835 x 345 x 210 mm |
| Product Weight | 10 kg (Net Weight 7.5 kg) |
| Materials | Carbon fiber, aluminum, plastic, and nylon fabric |
| TILTA FLOAT SYSTEM SUPPORT VEST | |
| Vest Size | 600 – 1200 mm |
| Extension | Built-in Tilta standard 15mm quick release baseplate |
| TILTA FLOAT SYSTEM ARM | |
| Connector Post Diameter | 12 mm |
| Maximum Payload Capacity | 10 kg |
| Up and Down Movement Range | 800 mm (±4300) |
| Weight | 2.27 kg |
| TILTA FLOAT SYSTEM POST | |
| Material | Carbon fiber and aluminum |
| Mount | NATO rail |
| Power Input/Output | 2-pin LEMO |
| Maximum Power Input | 14.8V, 6A |
| Length Range | 500 – 1000 mm |
| TILTA WIRELESS THUMB CONTROLLER FOR RS2 | |
| Mount | Cold shoe mount |
| Wireless Module | 2.4 GHz |
| Remote Control Range | 50 – 70 m (Dependent on the location, there might be a slight variance.) |
| Power Requirement | The Wireless Thumb Controller requires a single GoPro Hero 5-8 Battery to power which is not included |
| POWER SUPPLY SOLUTIONS | |
| 1. V-mount battery 2. Gold mount battery 3. DJI TB50 battery 4. RS2 battery grip | |
| ADDITIONAL INFORMATION | |
| Dimensions (Imperial) | 35 x 10 x 18 inches |
| Weight (Imperial) | 21.77 kg |
| Net Weight (Imperial) | 7.48 kg |
| Materials (Summary) | Aluminum alloy, stainless steel, carbon fiber, plastic, and nylon fabric |
| Color | Black |
สินค้าข้างล่างอาจเป็นสินค้าที่กำลังมองหาอยู่
